HYPERBOREA / Form-fillable 2e Char Sheet

**Posted by francisca** 1/24/2018 1:29 pm

reposted from G+:

https://drive.google.com/open?id=1KPl5WJCfta4nS30-Zv2C-OTephzwAPV5

Prior to the release of 2e, Jeff released a pdf of the new char sheet. Somebody added forms and reposted it. (I'm sorry, but I don't remember who did it...I'll gladly give credit if the name surfaces.) Anyway, the sheet as I found it tried to autocalculate the combat chart near the bottom, based on Fighting Ability (FA). It was little janky and didn't work, so I looked at it, and tried to fix it. I eventually got annoyed and stripped the math out and re-did the calculations, without relying on the FA value. So, for this sheet, simply put in the value needed to hit AC 0 in the proper box, and everything higher and lower will auto-calc/fill.

There are some other changes I'll probably make (fonts and text size) and I'll post any update here and on G+. I WILL NOT try to do a fully auto-calc sheet, as I need to be prepping 5 adventures for gary con, and don't have time for this.

But this is a perfectly serviceable sheet which will save our players from having to roll for Decipher Script to read the damn thing.

Last edited by francisca (1/24/2018 1:36 pm)

**Posted by BlackKnight** 1/24/2018 2:14 pm

THANK YOU!!!!

I've been looking for one, Need to create a bunch of Premades for TotalCon 2018 in a couple weeks. I'll be running two runs of the Adventure Module I wrote up.

**Posted by Doctor_Rob** 1/25/2018 5:54 pm

That's wizard - thankyou!

**Posted by Jimm.Iblis** 1/25/2018 6:22 pm

Thanks for posting! Already put the link up in my group chat.

**Posted by francisca** 1/26/2018 10:44 am

You're welcome, guys. Again, someone else did the bulk of the work, but I'm glad I was able to contribute a little bit.

**Posted by Ar'Pharazon** 1/27/2018 12:15 pm

Thanks Francisca!

**Posted by grodog** 1/30/2018 2:48 pm

Thanks Rich!

Allan.

**Posted by Handy Haversack** 3/01/2018 8:53 am

Has anyone had any trouble printing this sheet after filling it in? I'm trying to get the pregens finished off for GaryCon. For some reason, on the closer printer to me this one prints only the first page, and that blank, without any of the field data. It also prints:

ERROR: typecheck
OFFENDING COMMAND: cshow

STACK:

It must be an error at the printer since I was able to print to the farther-away machine (which I have to hustle to before anyone wonders when we went into cryomancy!).

Just wonderin'.

**Posted by Ghul** 3/01/2018 11:39 am

Handy Haversack wrote:
Has anyone had any trouble printing this sheet after filling it in? I'm trying to get the pregens finished off for GaryCon. For some reason, on the closer printer to me this one prints only the first page, and that blank, without any of the field data. It also prints:

ERROR: typecheck
OFFENDING COMMAND: cshow

STACK:

It must be an error at the printer since I was able to print to the farther-away machine (which I have to hustle to before anyone wonders when we went into cryomancy!).

Just wonderin'.

I never had trouble in the past, but I haven't used it in a year.

EDIT -- Sorry, I was thinking of Maezar's sheet. I've used these ones very recently with no problems.

Last edited by Ghul (3/01/2018 11:42 am)

**Posted by Ar'Pharazon** 3/03/2018 12:17 pm

Handy Haversack wrote:
Has anyone had any trouble printing this sheet after filling it in? I'm trying to get the pregens finished off for GaryCon. For some reason, on the closer printer to me this one prints only the first page, and that blank, without any of the field data. It also prints:

ERROR: typecheck
OFFENDING COMMAND: cshow

STACK:

It must be an error at the printer since I was able to print to the farther-away machine (which I have to hustle to before anyone wonders when we went into cryomancy!).

Just wonderin'.

I've begun printing the character sheets for my games this morning and have not run into any issues.

**Posted by francisca** 3/03/2018 2:29 pm

Nope, no problems on 4 different printers from 2 different computers.

**Posted by Handy Haversack** 3/04/2018 2:22 pm

Yeah, it's the printer driver. I have tried several now. There's something about booklet printing to ledger paper that just screws up every one I try on this machine. I can't ask for *too* much IT assistance since I don't print that much stuff for work . . .

**Posted by Ar'Pharazon** 3/15/2018 8:54 pm

Rich, I can't thank you enough for this. It was a total lifesaver for my games at Gary Con and will make life incredibly easy for me in future cons. I loathe making my players fill out their own character sheets at cons and I despise making player try and read my chicken scratch.